Choosing what to mount your wheel and pedals on, and how to set it up. For the full guide, read Best sim racing cockpits. Browse all sim racing questions.
What is a sim racing cockpit?
A sim racing cockpit, or rig, is a frame that holds your seat, wheel base, pedals and often screens in a fixed racing position, so nothing moves when you drive.
Do I need a sim racing cockpit?
Not to start. You need one when your wheel or pedals start moving your desk or chair, or when you upgrade to stronger direct drive bases or load cell pedals.
What is an aluminium profile rig?
A rig built from extruded aluminium beams with T-slots along each side. It's very rigid and you can bolt mounts anywhere, so it's easy to adjust and expand.
What does 80/20 or 80/40 mean?
It refers to aluminium profile sizes in millimetres, such as 40 by 80. Bigger profiles are stiffer. 80/20 is also an American brand name used generically.
Is a wheel stand good enough?
A good wheel stand works well for gear, belt and low-torque direct drive wheels. Stronger bases and stiff load cell brakes need a full cockpit.
Are foldable sim racing cockpits any good?
The better ones are fine for starter wheels and entry direct drive. They trade some rigidity for the ability to fold away.
Can I use my office chair with a sim rig?
Yes, with a wheel stand or a rig with an office chair option. It's less rigid and may roll, so lock or block the wheels.
What seat should I use in a sim rig?
A fixed bucket seat is the most rigid and realistic. A reclining seat is more comfortable for long races. Make sure it has the right brackets for your rig.
How much space does a sim rig need?
Typically about 1.4 m by 0.6 m of floor plus room to get in. Add about 1.2 m of width for triple monitors.
What is the correct sim racing seating position?
Sit so your arms are slightly bent with wrists resting on top of the rim, and your knees slightly bent at full brake. The top of the wheel should sit just below your line of sight to the screen.
GT or formula position, which is better?
GT is upright and suits most cars and people. Formula lays you back with feet raised, best for open-wheel cars. Some rigs can do both.
Can I put a sim rig on carpet?
Yes. Many people add a rig mat or board underneath to protect the floor and stop the rig shifting.
Do sim rigs come with monitor stands?
Some include them, others sell integrated or freestanding stands separately. A freestanding stand keeps rig vibration off your screens.
What is a front mount versus bottom mount for wheel bases?
A bottom mount bolts the base onto a wheel deck. A front mount bolts it by its face to brackets, which is usually stiffer and suits higher-torque bases.
How heavy is a sim racing cockpit?
Foldable cockpits weigh roughly 10 to 25 kg. Aluminium profile rigs are often 30 to 60 kg before seats and screens.
Can a sim rig damage my floor?
Heavy rigs and bass shakers can mark floors over time. A rubber mat or rig board spreads the load and absorbs vibration.
How do I stop my sim rig flexing?
Tighten every bolt, use a front mount for the wheel base, add bracing and make sure the pedal plate is properly supported.
Can I build my own sim rig?
Yes. Many people build rigs from aluminium profile or wood. Aluminium kits and cut-to-length profile make it easier to get a stiff result.
Should I bolt my monitors to my rig?
Rig-mounted stands are neat but pass vibration to the screens. A separate freestanding stand avoids shake, especially with bass shakers.
Can I move a sim rig between rooms?
Foldable cockpits move easily. Full aluminium rigs are heavy and usually need partial disassembly, so pick the room carefully.
Didn't find your answer? See Best sim racing cockpits or browse every question.